Designed & crafted in Vietnam
Small objects. Made with great care.
Home décor, gifts and desk essentials — 3D printed and CNC-milled wood.
Curves born from an algorithm.
A parametric design with soft spiralling ribs that catch the light from every angle. Printed as one seamless piece.
An image that appears in the light.
The image is formed by varying wall thickness — revealed only when lit. Warm, gentle light.
Colorful, straight off the printer.
A multicolor desk figure printed in a single run, with color built into the material — no paint, no fading.
Patterns carved into natural grain.
Oak and pine coasters with concentric geometric grooves precisely CNC-milled and hand finished (189,000₫ / set of 6).
Order, carved from a single block.
A compartment tray milled from solid wood to keep pens, cards and small things in order.
Two colors. One piece.
A minimal stand angled for video calls and viewing, with two colors printed in.
Small. Full of color.
Geometric keychains in bright color combinations — a small, delightful gift (119,000₫ / set of 4).
A little green for your desk.
A mini planter with faceted polygon surfaces, perfect for succulents and cacti.
Waves across the grain.
An oak and pine panel with raised CNC-milled waves — a decorative accent for desks and shelves.
Weighted wave wood with magnetic PLA clips.
A weighted 3D wave-milled pine block with a non-slip felt bottom, paired with three matte PLA magnetic cable locking clips.
Helical ribs seated in a weighted pine base.
Combines a 6-rib helical 3D-printed matte PLA upper cup with a weighted CNC-milled natural pine base and an interior felt pad to protect pen tips.
Cradles your lenses on soft natural canvas.
A wave-carved pine base with a charcoal felt recess for folded temple arms and a canvas-upholstered 3D-printed nose bridge rest.
S-curved wave acrylic anchored in solid pine.
4mm cast acrylic CNC-milled with vertical wave flutes and heat-bent into an ergonomic S-curve, anchored in a wave-milled pine base with a matte PLA lip.
Pin notes on taut canvas, clip cards in bent acrylic.
A wave-milled pine base supporting a steel-core board upholstered in natural canvas, with 3 multicolor PLA magnetic pins and a heat-bent amber acrylic side clip.
A soft canvas watch pillow and felt earbud well.
A wave-carved pine base with a felt-lined earbud recess, paired with an angled matte PLA pillar and a natural cotton canvas watch pillow.
A brass-pivoted lid uniting wave wood and curved acrylic.
A spiral-fluted matte PLA box lined with dark felt, topped with a brass-pivoted swivel lid combining wave-milled pine and a curved amber acrylic window.
Soft canvas floor with a sliding PLA divider.
A CNC-milled pine frame with wave-fluted exterior walls, a natural cotton canvas floor, and a removable matte PLA divider that slides along the wooden rails.
Embedded magnets inside 3D-printed geometric keytags.
A wave-milled oak and pine wall bar paired with three geometric matte PLA keytags with Neodymium magnets embedded inside the print core.
Twin spiral planters on a cork-lined wave wood tray.
Two helical-ribbed matte PLA mini planters (tall and short) with hidden drainage grids, resting in cork-lined drip wells on a wave-milled pine tray.
Turn multicolor date blocks, slide the amber acrylic cursor.
A wave-milled pine base holding multicolor 3D-printed date cubes and month bars, accented by a heat-bent U-shaped amber acrylic sliding cursor.
Spiral arches, wave wood and L-bent acrylic tongues.
A pair of bookends uniting wave-milled pine blocks and spiral-ribbed matte PLA stepped arches with 4mm heat-bent L-curve frosted acrylic under-book tongues.
Warm LED light guided along a heat-bent wave acrylic arch.
A 4mm cast acrylic sheet CNC-milled with wave grooves and heat-formed into a 3D U-arch dome, glowing with warm LED light from a round CNC-milled pine base.
Soft warm light diffused through helical ribs.
A cylindrical-dome lampshade 3D-printed in warm off-white matte PLA with continuous helical ribs that diffuse a gentle warm glow over a CNC-milled natural wood base.
Craft
Every product is made with the tool best suited to it.
Large-format 3D printing
For larger pieces such as vases and lamps — smooth surfaces and seamless lines.
Multicolor 3D printing
Multiple toolheads work together to create vibrant, multicolor objects in a single print — no painting required.
CNC wood milling
Natural wood is precisely milled and engraved, then finished by hand, detail by detail.
Nothing unnecessary — just function and the natural beauty of the material.
Plant-based PLA and carefully selected natural wood.
Every piece is designed and finished in Go Quao, Kien Giang.
Interested in a product? Message us on Zalo or social media for the fastest reply.